- Create Mac Image For Deployment Autoimg Free
- Create Mac Image For Deployment Autoimg 2018
- Create A Mac Image For Deployment
- Create Mac Image For Deployment Autoimg 2016
- Create Mac Image For Deployment Autoimg Youtube
- Enter an Image Name; Click Add Image; Add A Computer. As of CloneDeploy 1.3.0 the preferred method to add a machine is from the client boot method you selected. This will generate a unique id which will allow the same mac address to be used with multiple computers. A Computer, also referred to as a client, is any machine( Physical or Virtual.
- Select the Capture Image tab in the utility. Select the appropriate volume to capture (most often Macintosh HD) and select Start Capture in the bottom right corner. When complete, the image is now ready to deploy. To deploy the image, NetBoot the Mac unit(s) you would like to deploy to. Access the same utility only select the Deploy Image tab.
- In the Disk Utility app on your Mac, choose File New Image, then choose Image from Folder. Select the folder or connected device in the dialog that appears, then click Open. Enter a filename for the disk image, add tags if necessary, then choose where to save it.
Disk Utility User Guide
Sep 25, 2019 Creating NetBoot image can be devided into three steps. Capture an OS X Boot Image.; Add the OS X Boot Image to Configuration Manager.; Distribute Content of the OS X Boot Image.; Capture an OS X Boot Image: Download PmmOsdImageBuilder.dmg: Go to SCCM Administration Overview Parallels Mac Management Mac Client Enrollment. In the Mac Client Enrollment list, right-click the Mac.
You can use Disk Utility to create a disk image, which is a file that contains other files and folders.
Note: You can burn information to a CD or DVD using the Burn command in the Finder. See Burn CDs and DVDs.
Create a blank disk image for storage
You can create an empty disk image, add data to it, then use it to create disks, CDs, or DVDs.
- In the Disk Utility app on your Mac, choose File > New Image > Blank Image.
- Enter a filename for the disk image, add tags if necessary, then choose where to save it.This is the name that appears in the Finder, where you save the disk image file before opening it.
- In the Name field, enter the name for the disk image.This is the name that appears on your desktop and in the Finder sidebar, after you open the disk image.
- In the Size field, enter a size for the disk image.
- Click the Format pop-up menu, then choose the format for the disk:
- If the disk image will be used with a Mac that has a solid state drive (SSD) and uses macOS 10.13 or later, choose APFS or APFS (Case-sensitive).
- If the disk image will be used with a Mac with macOS 10.12 or earlier, choose Mac OS Extended (Journaled) or Mac OS Extended (Case-sensitive, Journaled).
- If the disk image will be used with a Mac or Windows computer and is 32 GB or less, choose MS-DOS (FAT); if it’s over 32 GB, choose ExFAT.
- To encrypt the disk image, click the Encryption pop-up menu, then choose an encryption option.
- Click the Partitions pop-up menu, then choose a partition layout.
- Click the Image Format pop-up menu, then choose an option:
- Sparse bundle disk image: Same as a sparse disk image (below), but the directory data for the image is stored differently. Uses the .sparsebundle file extension.
- Sparse disk image: Creates an expandable file that shrinks and grows as needed. No additional space is used. Uses the .sparseimage file extension.
- Read/write disk image: Allows you to add files to the disk image after it’s created. Uses the .dmg file extension.
- DVD/CD master: Changes the size of the image to 177 MB (CD 8 cm). Uses the .cdr file extension.
- Click Save, then click Done.Disk Utility creates the disk image file where you saved it in the Finder and mounts its disk icon on your desktop and in the Finder sidebar.
- In the Finder, copy your files to the mounted disk image, then eject it.
- Restore the disk image to a disk.For more information about disk image types, see the manual (man) page for hdiutil.
Create a disk image from a disk or connected device
You can create a disk image that includes the data and free space on a physical disk or connected device, such as a USB device. For example, if a USB device or volume is 80 GB with 10 GB of data, the disk image will be 80 GB in size and include data and free space. You can then restore that disk image to another volume.
- In the Disk Utility app on your Mac, select a disk, volume, or connected device in the sidebar.
- Choose File > New Image, then choose “Image from [device name].”
- Enter a filename for the disk image, add tags if necessary, then choose where to save it.This is the name that appears in the Finder, where you save the disk image file before opening it.
- Click the Format pop-up menu, then choose an option:
- Read-only: The disk image can’t be written to, and is quicker to create and open.
- Compressed: Compresses data, so the disk image is smaller than the original data. The disk image is read-only.
- Read/write: Allows you to add files to the disk image after it’s created.
- DVD/CD master: Can be used with third-party apps. It includes a copy of all sectors of the disk image, whether they’re used or not. When you use a master disk image to create other DVDs or CDs, all data is copied exactly.
- To encrypt the disk image, click the Encryption pop-up menu, then choose an encryption option.
- Click Save, then click Done.Disk Utility creates the disk image file where you saved it in the Finder and mounts its disk icon on your desktop and in the Finder sidebar.
Important: Don’t create a disk image of a disk that you believe to be failing or that contains corrupted information. The disk image may not serve as a reliable backup.
For technical information about creating a restore disk image, see the Apple Software Restore (ASR) manual (man) page.
Create a disk image from a folder or connected device
You can create a disk image that contains the contents of a folder or connected device, such as a USB device. This method doesn’t copy a device’s free space to the disk image. For example, if a USB device or volume is 80 GB with 10 GB of data, the disk image will be 10 GB in size and include only data, not free space. You can then restore that disk image to another volume.
- In the Disk Utility app on your Mac, choose File > New Image, then choose Image from Folder.
- Select the folder or connected device in the dialog that appears, then click Open.
- Enter a filename for the disk image, add tags if necessary, then choose where to save it.This is the name that appears in the Finder, where you save the disk image file before opening it.
- To encrypt the disk image, click the Encryption pop-up menu, then choose an encryption option.
- Click the Image Format pop-up menu, then choose an option:
- Read-only: The disk image can’t be written to, and is quicker to create and open.
- Compressed: Compresses data, so the disk image is smaller than the original data. The disk image is read-only.
- Read/write: Allows you to add files to the disk image after it’s created.
- DVD/CD master: Can be used with third-party apps. It includes a copy of all sectors of the disk image, whether they’re used or not. When you use a master disk image to create other DVDs or CDs, all data is copied exactly.
- Hybrid image (HFS+/ISO/UDF): This disk image is a combination of disk image formats and can be used with different file system standards, such as HFS, ISO, and UDF.
- Click Save, then click Done.Disk Utility creates the disk image file where you saved it in the Finder and mounts its disk icon on your desktop and in the Finder sidebar.
For technical information about creating a restore disk image, see the Apple Software Restore (ASR) manual (man) page.
Create a secure disk image
If you have confidential documents that you don’t want others to see without your permission, you can put them in an encrypted disk image.
Note: If you want to protect the contents of the system disk, turn on FileVault using the FileVault pane of Security & Privacy Preferences.
- In the Disk Utility app on your Mac, choose File > New Image > Blank Image.
- Enter a filename for the disk image, add tags if necessary, then choose where to save it.This is the name that appears in the Finder, where you save the disk image file before opening it.
- In the Name field, enter the name for the disk image.This is the name that appears on your desktop and in the Finder sidebar, after you open the disk image.
- In the Size field, enter a size for the disk image.
- Click the Format pop-up menu, then choose a format:
- If you’re using the encrypted disk image with a Mac computer using macOS 10.13 or later, choose APFS or APFS (Case-sensitive).
- If you’re using the encrypted disk image with a Mac computer using macOS 10.12 or earlier, choose Mac OS Extended (Journaled) or Mac OS Extended (Case-sensitive, Journaled).
- Click the Encryption pop-up menu, then choose an encryption option.
- Enter and re-enter a password to unlock the disk image, then click Choose.WARNING: If you forget this password, you won’t be able to open the disk image and view any of the files.
- Use the default settings for the rest of the options:
- Click the Partitions pop-up menu, then choose Single partition - GUID Partition Map.
- Click the Image Format pop-up menu, then choose “read/write” disk image.
- Click Save, then click Done.Disk Utility creates the disk image file where you saved it in the Finder and mounts its disk icon on your desktop and in the Finder sidebar.
- In the Finder , copy the documents you want to protect to the disk image.
- If you want to erase the original documents so they can’t be recovered, drag them to the Trash, then choose Finder > Empty Trash.
When you’re finished using the documents on the secure disk image, be sure to eject the disk image. As long as it’s available on your desktop, anyone with access to your computer can use the documents on it.
To access the data in a disk image, double-click it. It appears on your desktop, and you can add, remove, and edit files on it just as you would with a disk.
See alsoAdd a checksum to a disk image using Disk Utility on MacVerify that a disk image’s data isn’t corrupted using Disk Utility on MacRestore a disk image to a disk using Disk Utility on MacConvert a disk image to another format using Disk Utility on Mac
Introduction
Winclone 7 supports deploying Windows via Microsoft Deployment Toolkit (MDT) via booting to a Windows Preinstallation Environment (WinPE). A similar workflow can be applied for environments that deploy Windows images via SCCM. This document covers setting up MDT, creating the WINPE files, creating the Winclone package and booting into the WinPE environment.
Requirements
- Microsoft Deployment Toolkit installed on a Windows PC or virtual machine
- Winclone 7
- Boot Camp Drivers from Apple
- Modern Mac
Overview
In order to boot Macs into the WinPE environment, the correct files must be installed on the Boot Camp partition. These files include a WIM file that contains the correct drivers and boot files. The Mac must also be configured to boot the WinPE environment into RAM so Windows can be installed on it.
This process outlines using MDT to create the WinPE files, and using Winclone to create and deploy a Winclone image that will deploy the correct files and make the WinPE environment correctly bootable. After the Mac boots into the WinPE environment, Task Sequences can be run to image the Boot Camp partition the same way as imaging PCs. This process also does not destroy the Mac partition.
The Development Toolkit creates the WinPE image and allows you to inject Windows drivers into the WinPE environment. Drivers are important because they will give the Mac network access, mouse, and keyboard in the WinPE environment. Hitman absolution free full version for pc download instal.
Install MDT
Download and install the Microsoft Development Toolkit and install in Windows 10. After installation, launch the Deployment Workbench from the Start Menu. After Deployment Workbench launches, create a Deployment Share. The Deployment Share is an SMB share that contains all the required resources (such as boot files, packages, images, and more). When a Mac boots into WinPE, it will connect to the Deployment Share to discover Task Sequences, images, and other resources required to image the Boot Camp partition.
Share Location
The Deployment Share must be accessible on the network, so create a folder and share it or enter in a share path to an existing share.
![Autoimg Autoimg](https://www.createanddeploy.co.uk/wp-content/uploads/2019/09/big-mac-1.jpg)
Name
Give the Deployment Share a name.
Options
Set the options. If any options are selected, you will be prompted to enter in the value when needed.
Summary
Verify the settings.
Progress
The Deployment Share resources will now be created.
Confirmation
Once the Deployment Share has been created, click Finish.
Boot Camp Assistant
To download the correct drivers for a Mac, open Boot Camp Assistant in the Utilities folder in macOS. Note that this procedure must be done on each model Mac that you will be imaging since different models may have different driver sets.
Support Software Menu
In Boot Camp Assistant, select “Download Windows Support Software” from the Action menu. Save the Support Software to a folder with a name the includes the model number of the Mac so that you can keep track of them.
Import Drivers
Back in Deployment Workbench, import the Boot Camp drivers. Normally, you only need to import the drivers in the $WinPEDriver$ folder, since those are the drivers required to boot and for basic functionality. However, the network drivers may not be included in the $WinPEDriver$ folder. You many need to extract other drives in the Bootcamp ->Drivers folder using a tool such as “The Unarchiver” to get access to the required INF files. In the initial pass, import $WinPEDriver$ and see if it contains the required drivers. If not, you can add additional ones later by importing them.
Specify Directory
When prompted, select the $WinPEDriver$ folder in the Support Software folder you downloaded in Boot Camp Assistant.
Summary
Confirm the settings and click Next.
Confirmation
Once the drivers have been imported, click Finish.
MDT Settings
Now that the drivers have been imported, the next step is to create the WinPE files. Some special settings need to be set, so select the Deployment Share, then right click and select Properties.
Deployment Share General
In the General tab, de-select x86 since most modern Macs are 64-bit. Unselecting this will reduce the WinPE build time and storage space requirements on the Deployment Share.
Deployment Share Rules
The Deployment Share rules are variables that configure which parts of the task sequences are shown and let you override settings in the Task Sequence. The UserID, UserDomain, UserPassword, and DeploymentRoot are specified both here and in the Bootstrap.ini. If these settings are not provided, the user will be prompted to enter them in WinPE.
Bootstrap.ini
The bootstrap.ini file contains the bare minimum settings to connect to the Deployment Share. Add in the UserID, UserDomain, UserPassword, and DeploymentRoot. Note that you must specify a value for UserDomain (otherwise you will be prompted in WinPE). If the MDT Deployment Share is on a computer that is not part of a domain, the UserDomain won’t be used so it can be set to any value.
Deployment Share Windows PE
In the Windows PE tab, make sure the x64 Platform is selected. The “Lite Touch Windows PE WIM file” will be the files that are loaded into RAM and booted into. The ISO image is what initially boots the WinPE environment to bootstrap the loading of the files from the WIM file.
Make sure “Generate a Lite Touch Windows PE WIM file” and “Generate a Lite Touch bootable ISO image” are selected as shown.
Deployment Share Feature Tab
The WinPE environment can contain additional features, such as Windows PowerShell or .NET, that are needed for scripting installs. Include any Feature Packs you may need. It is common to include .NET Framework and Windows PowerShell.
Deployment Share Drivers and Patches Tab
The Deployment Share “Drivers and Patches” tab configures what drivers to include. Select the All Drivers profile to include all Boot Camp drivers you imported earlier.
Update Deployment Share
To create the WinPE files, right click on the Deployment Share and select Update Deployment Share.
Update Deployment Share Options
To create the WinPE environment, select “Completely regenerate the boot images” and click Next.
Update Deployment Share Confirmation
Once the WinPE files have been created, click Finish.
Task Sequences
Create a new Task Sequence by right clicking on Task Sequence and select New Task Sequence. A Task sequence is the workflow that is run in the WinPE environment that images the Boot Camp partition.
New Task Sequence: General Settings
Give the task sequence a unique identifier and a Task Sequence name. The name will be shown in a list of Task Sequences in the WinPE environment to select from.
Click Next.
New Task Sequence: Select Template
A Task Sequence is composed of different steps. MDT provides some preconfigured templates. Select the Standard Client Task Sequence and click Next.
New Task Sequence: Select Template
Select an OS that will be restored to the Boot Camp partition and click Next.
New Task Sequence: Specify Product Key
Specify a product key if needed. Typically, it is not required to specify a product key. Click Next.
New Task Sequence: OS Settings
Provide a Full Name, Organization, and Internet Explorer Home page. Click Next.
New Task Sequence: Admin Password
Provide an Admin Password, or select the option to specify during imaging.
New Task Sequence: Summary
Verify settings, and click Next.
New Task Sequence: Confirmation
Once completed, click Finish
Create Mac Image For Deployment Autoimg Free
Modify Task Sequence
Remove all the steps except for the steps shown above.
Modify Task Sequence: Select OS and target
In the Install Operating System step, set the location to Specify Logical Drive Letter and enter in “c” (without the quotes). Click Apply and then OK.
Deployment Share Mounted Volume
In macOS with Winclone 7 Pro installed, mount the Deployment Share by using Finder and selecting “Go to Folder…” under the Go menu.
Deployment Share Files
The Winclone image will be created from a folder of files. This folder will contain all the files from the ISO.
Create Winclone Image from PE Folder
Mount the LiteTouchPE_x64.iso in the Finder by clicking on it.
Create Winclone Image from WinPE Folder Menu
Create a Winclone image from the WinPE folder by selecting “Create Winclone Image from WinPE Folder…”.
Create Winclone Image from WinPE Folder Sheet
Click Select Folder and select the mounted ISO that you mounted in the prior step.
Save
![For For](https://usermanual.wiki/quark/QXPS80WIGWin.1608559456/asset-49.png)
Click Save Image… and give the Winclone image a name. Click Save.
Winclone 7 Main Window
Test the image by restoring it to a Boot Camp partition. Click Restore Image in the main window of Winclone 7 or Winclone 8.
Restore Image
In the Restore Image sheet that appears, click Select Source and choose the Winclone image you created. Select a Boot Camp partition as the Destination (if you do not have a Boot Camp partition create one using Disk Utility). Click Restore Image.
Create Mac Image For Deployment Autoimg 2018
Once the image is completed, reboot the Mac and hold down the option key. Select Windows (or EFI) in the OS selection screen, and the Mac will boot into the WinPE environment.
Select Create Package
Once you have verified that the image successfully boots to WinPE, you can create a Winclone Package to easily deploy this image to multiple machines. To do this, select Create Package from the Winclone 7 main window.
Create Package
Only the Basic Options tab applies to WinPE. Select if a Boot Camp partition will be created and click Create Package.
Save
Give the package a name and save the package.
Create A Mac Image For Deployment
Package Deployment
Create Mac Image For Deployment Autoimg 2016
The package is now a standard macOS installer package that will create a Boot Camp partition (if needed), restore the WinPE files to the partition and then set it to boot into the WinPE environment correctly. Once the WinPE environment has been booted from memory, the Boot Camp partition can be formatted and an image installed on it using a Task Sequence.